Friday, March 12, 2010
Progress Update!
I generalized by using my results from all 4 different designs i came up with. On my y axis i numbered it according to what i got in the calculator and numbered it according to the maxium. On the x axis i went by 2s i think this is a easier way to graph my results. I organized my tables by using the designs, all i had to do for each table was find the lenght, width, girth, and volume. By the end, i needed to put together a function that will allow me to insert into the calculator to get the numbers to graph. Btw this project is hard!"/
Subscribe to:
Post Comments (Atom)
1. Please break up your post into paragraphs for readers.
ReplyDelete2. Need to provide explanation on "by using my results from all 4 different designs i came up with."
3. Your y-axis scale should've been much higher than 2 since we're dealing with tens of thousands of cubic inches. I think you might have meant that your x-axis scale is 2.
4. You did not come after school, like you said you would, for tutoring. Please use the tutoring time to work on the project.